the minimum qualification of a NICET Level-III
technician for preparation of all fire protection
system drawings.
**************************************************************************
[Qualifications of System Technician: Installation drawings, shop drawing
and as-built drawings shall be prepared, by or under the supervision of, an
individual who is experienced with the types of works specified herein, and
is currently certified by the National Institute for Certification in
Engineering Technologies (NICET) as an engineering technician with minimum
Level-III certification in Special Hazard System program. Contractor shall
submit data for approval showing the name and certification of all involved
individuals with such qualifications at or prior to submittal of drawings.]
1.6
SPARE PARTS
Furnish the following spare parts:
a.
Two of each type detector installed.
b.
One of each type of audible and visual alarm device installed.
c.
Two of each type of fuse required by the system.
d.
Five complete sets of system keys.
1.7
ELECTRICAL WORK
Provide electrical work associated with this section under Section 16402
INTERIOR DISTRIBUTION SYSTEM, except for control [and fire alarm] wiring.
[Provide fire alarm system under Section 13852N INTERIOR FIRE ALARM
SYSTEM.] Provide control [and fire alarm] wiring[, including connections
to fire alarm systems,] under this section in accordance with NFPA 70.
Provide wiring in rigid metal conduit or intermediate metal conduit, except
electrical metallic tubing conduit may be provided in dry locations not
enclosed in concrete or where not subject to mechanical damage.
1.8
WARRANTY
1.8.1
Year 2000 (Y2K) Compliance Warranty
For each product, component and system specified in this section as a
"computer controlled facility component" provide a statement of Y2K
compliance warranty for the specific equipment. The contractor warrants
that each hardware, software, and firmware product delivered under this
contract and listed below shall be able to accurately process date and time
data (including, but not limited to, calculating, comparing, and
sequencing) from, into, and between the twentieth and twenty-first
centuries, and the years 1999 and 2000 and leap year calculations to the
extent that other computer controlled components, used in combination with
the computer controlled component being acquired, properly exchange data
and time data with it. If the contract requires that specific listed
products must perform as a system in accordance with the foregoing
warranty, then that warranty shall apply to those listed products as a
system. The duration of this warranty and the remedies available to the
Government for breach of this warranty shall be defined in, and subject to,
the terms and limitations of the contractor's standard commercial warranty
or warranties contained in this contract, provided that, notwithstanding
any provisions to the contrary, in such commercial warranty or warranties,
SECTION 13961N
Page 9
Previous Page
