conditions. Refer to safety cautions in NFPA 12. If
there are questions concerning system design, the
Engineering Field Division, Naval Facilities
Engineering Command, Fire Protection Engineer,
should be consulted.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASME INTERNATIONAL (ASME)
ASME B16.11
(2002) Forged Fittings, Socket-Welding and
Threaded
ASME B16.3
(1998) Malleable Iron Threaded Fittings
ASME B16.39
(1998) Malleable Iron Threaded Pipe Unions
ASTM INTERNATIONAL (ASTM)
ASTM A 106
(2002a) Seamless Carbon Steel Pipe for
High-Temperature Service
ASTM A 53
(1999b) Pipe, Steel, Black and Hot-Dipped,
Zinc-Coated, Welded and Seamless
FM GLOBAL (FM)
FM P7825
(2003) Approval Guide
MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS
INDUSTRY (MSS)
MSS SP-58
(2002) Pipe Hangers and Supports -
Materials, Design and Manufacture
MSS SP-69
(2002) Pipe Hangers and Supports -
Selection and Application
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 12
(2005) Carbon Dioxide Extinguishing
NFPA 70
(2005) National Electrical Code
SECTION 13961N
Page 4
Previous Page
