Operator's Training II.

g.

Diagnostics.

1.5.3

Operator's Training II

The second course shall be taught at the project site for a period of up to

five consecutive training days during or after the Contractor's field

testing, but before commencing the performance verification test. A

maximum of [12] [____] personnel shall attend the course. No part of the

training given during this course will be counted toward completion of the

performance verification test. The course shall include instruction on the

specific hardware configuration of the installed system and specific

instructions for operating the installed system. Upon completion of this

course, each student shall be able to start the system, operate the system,

recover the system after a failure, and describe the specific hardware

architecture and operation of the system. Specific application of the

results of this course should enable the students to proficiently monitor

the alarm workstations during the performance verification test.

1.5.4

Operator's Training III

The third course shall be taught while the endurance test is in progress

for a total of 16 hours of instruction per student, in time blocks of 4

hours. A maximum of [12] [_____] personnel shall attend the course. The

schedule of instruction shall allow for each student to receive individual

instruction for a 4-hour period in the morning (or afternoon) of the same

weekday. The Contractor shall schedule his activities during this period

so that the specified amount of time will be available during the endurance

test for instructing the students. The course shall consist of hands-on

training under the constant monitoring of the instructor. The instructor

shall be responsible for determining the appropriate password to be issued

to the student commensurate with each student's acquired skills at the

beginning of each of these individual training sessions. Upon completion

of this course, the students shall be fully proficient in the operation of

the system.

1.5.5

System Manager Training

[_____] system managers shall be trained for at least 3 consecutive days.

The system manager training shall consist of the operator's training and

the following:

a.

Enrollment/deactivation.

b.

Assignments of identifier data.

c.

Assign operator password/levels.

d.

Change database configuration.

e.

System network configuration and management.

f.

Modify graphics.

g.

Print special or custom reports.

h.

System backup.

i.

Any other functions necessary to manage the system.

SECTION 13720A

Page 26