1.3.1.4
Software Data
The software data package shall consist of descriptions of the operation
and capability of system, and application software as specified.
1.3.1.5
Overall System Reliability Calculations
The overall system reliability calculations data package shall include all
manufacturer's reliability data and calculations required to show
compliance with the specified reliability in accordance with paragraph,
OVERALL SYSTEM RELIABILITY REQUIREMENTS.
1.3.1.6
Certifications
Specified manufacturer's certifications shall be included with the data
package certification.
1.3.1.7
Key Control Plan
The Contractor shall provide a key control plan.
The key control plan
shall include the following:
a.
Procedures that will be used to log and positively control all
keys during installation.
b.
A listing of all keys and where they are used.
c.
A listing of all persons allowed access to the keys.
1.3.2
Group II Technical Data Package
The Contractor shall prepare and submit a report of "Current Site
Conditions" to the Government documenting site conditions that
significantly differ from the design drawings or conditions that affect
performance of the system to be installed. The Contractor shall provide
specification sheets, or written functional requirements to support the
findings, and a cost estimate to correct those site changes or conditions.
The Contractor shall not correct any deficiency without written permission
from the Government.
1.3.3
Group III Technical Data Package
The Contractor shall prepare test procedures and reports for the
pre-delivery test. The Contractor shall base the pre-delivery test
procedures on the material contained in UFC [_____], PRE-DELIVERY TEST
PROCEDURES FOR ELECTRONIC SECURITY SYSTEMS.
1.3.4
Group IV Technical Data Package
The Contractor shall prepare test procedures and reports for the
performance verification test and the endurance test. The Contractor shall
base the test procedures on the material contained in UFC [_____],
PERFORMANCE VERIFICATION TEST PROCEDURES FOR ELECTRONIC SECURITY SYSTEMS.
The Contractor shall deliver the performance verification test and
endurance test procedures to the Government for approval.
1.3.4.1
Operation and Maintenance Manuals
Draft copies of the operator's, software, hardware, functional design, and
SECTION 13720A
Page 21
Previous Page
