h.
Entry control system block diagram and layout.
i.
CCTV assessment block diagram and layout.
j.
Details of interconnections with Intercom system.
k.
Details of interconnections with Security Lighting system.
l.
Intrusion detection system block diagram and sensor layout
(including exterior and interior zones) as well as sensor
detection patterns.
1.3.1.2
Manufacturer's Data
The data package shall include manufacturer's data for all materials and
equipment, including terminal devices, local processors and central station
equipment provided under this specification.
1.3.1.3
System Description and Analyses
The data package shall include system descriptions, analyses, and
calculations used in sizing equipment specified. Descriptions and
calculations shall show how the equipment will operate as a system to meet
the performance of this specification. The data package shall include the
following:
a.
On-board Random Access Memory (RAM).
b.
Communication speeds and protocol descriptions.
c.
Hard disk size and configuration.
d.
CD-ROM/CD-RW/DVD/DVD-RW drive speed and protocol descriptions.
e.
Streaming tape back-up speed and capacity.
f.
Floppy disk size and configuration.
g.
Alarm response time calculations..
h.
Command response time calculations.
i.
Start-up operations including system and database backup
operations.
j.
Expansion capability and method of implementation.
k.
Sample copy of each report specified.
l.
Color output of typical graphics.
m.
System throughput calculation.
The data package shall also include a table comparing the above information
for the equipment supplied and the minimum required by the software
manufacturer.
SECTION 13720A
Page 20
Previous Page
