complete bound volume.
b.
Indicate by prominent notation, each report in the submittal.
Indicate specification number and pararaph number to which it
pertains.
1.5.8
Format of SD-10 Operation and Maintenance (O&M) Data
a.
O&M Data format shall comply with the requirements specified in
Section 01781, Operation and Maintenance Data"
1.5.9
Format of SD-01 Preconstruction Submittals and SD-11 Closeout
Submittalss
a.
When submittal includes a document which is to be used in project
or become part of project record, other than as a submittal, do
not apply Contractor's approval stamp to document, but to a
separate sheet accompanying document.
b.
Provide all dimensions in administrative submittals in metric.
Where data are included in preprinted material with English units
only, submit metric dimensions on separate sheet.
1.6
QUANTITY OF SUBMITTALS
**************************************************************************
NOTE: The quantities suggested below are consistent
with the quantities to be retained by the
Government, in paragraphs entitled "QC Organization
Responsibilities" and "Government Responsibilities;"
maintain the coordination.
**************************************************************************
1.6.1
Number of Copies of SD-02 Shop Drawings
**************************************************************************
NOTE: Verify with the Contracting Officer the
number of submittals required; normally "six" for
Quality Control Manager approval and "seven" for
Contracting Officer approval.
**************************************************************************
a.
Submit [six] [_____] copies of submittals of shop drawings
requiring review and approval only by QC organization and [seven]
[_____] copies of shop drawings requiring review and approval by
Contracting Officer.
1.6.2
Number of Copies of SD-03 Product Data and SD-08 Manufacturer's
Instructions
Submit in compliance with quantity requirements specified for shop drawings.
1.6.3
SD-04 Number of Samples
**************************************************************************
NOTE: For NAVFAC Atlantic, require one sample in
paragraph a and delete the second sentence of
paragraph a.
**************************************************************************
SECTION 01330
Page 17
Previous Page
