Contractor to proceed with work covered.
c.
Submittals marked "approved as noted" or "approval except as
noted; resubmission not required" authorize Contractor to proceed
with work as noted provided Contractor takes no exception to the
notations.
d.
Submittals marked "revise and resubmit" or "disapproved" indicate
submittal is incomplete or does not comply with design concept or
requirements of the contract documents and shall be resubmitted
with appropriate changes. No work shall proceed for this item
until resubmittal is approved.
1.5
FORMAT OF SUBMITTALS
1.5.1
Transmittal Form
Transmit each submittal, except sample installations and sample panels, to
office of approving authority. Transmit submittals with transmittal form
prescribed by Contracting Officer and standard for project. The
transmittal form shall identify Contractor, indicate date of submittal, and
include information prescribed by transmittal form and required in
paragraph entitled "Identifying Submittals." Process transmittal forms to
record actions regarding sample panels and sample installations.
1.5.2
Identifying Submittals
Identify submittals, except sample panel and sample installation, with the
following information permanently adhered to or noted on each separate
component of each submittal and noted on transmittal form. Mark each copy
of each submittal identically, with the following:
a.
Project title and location.
b.
Construction contract number.
c.
Section number of the specification section by which submittal is
required.
d.
Submittal description (SD) number of each component of submittal.
e.
When a resubmission, add alphabetic suffix on submittal
description, for example, SD-10A, to indicate resubmission.
f.
Name, address, and telephone number of subcontractor, supplier,
manufacturer and any other second tier Contractor associated with
submittal.
g.
Product identification and location in project.
1.5.3
Format for SD-02 Shop Drawings
a.
Shop drawings shall not be less than A4 (297 by 210 mm) 8 1/2 by
11 inches nor more than AO (1189 by 841 mm) 30 by 42 inches.
b.
Present A4 (297 by 210 mm) 8 1/2 by 11 inches sized shop drawings
as part of the bound volume for submittals required by section.
Present larger drawings in sets.
SECTION 01330
Page 14
Previous Page
