1.4.1.2
A complete data package shall be delivered for all material, including
field and system equipment.
1.4.1.3
Data Transmission System Description and Analyses
The data package
shall include complete system description, and analyses
and calculations
used in sizing equipment required by these specifications.
Descriptions and
calculations shall show how the equipment will operate as
a system to meet
the specified performance. The data package shall include
the following:
a. FO receivers, transmitters, transceivers, multiplexers, FO modem
transmit and receive levels, and losses in decibels (dB) on each
communication link.
b. Digital transmitter and receiver communication speed and protocol
description.
c. Analog signal transmission method and bandwidth of the transmitter
and receiver.
d. Data transmission system expansion capability and method of
implementation.
e. FO system signal-to-noise ratio calculation for each communication
link.
f. Flux-budget and gain margin calculation for each communication link.
1.4.1.4
System Overall Reliability Calculations
**************************************************************************
NOTE: The designer must insert the section that
describes the system configuration.
**************************************************************************
The data package shall include manufacturers' reliability data and
calculations required to show compliance with the specified reliability.
The calculations shall be based on the configuration specified in Section
[_____] and as shown.
1.4.1.5
Certifications
Specified manufacturers' certifications shall be included with the data
package.
1.4.1.6
Key Control Plan
**************************************************************************
NOTE: The designer will specify the Section in
which a key control plan is found, when this
specification is used with IDS, ESS, or CCTV:
Section 13702N BASIC INTRUSION DETECTION SYSTEMS
(IDS); Section 13703N COMMERCIAL INTRUSION DETECTION
SYSTEMS (IDS); Section 13720A ELECTRONIC SECURITY
SYSTEM; Section 13721A SMALL INTRUSION DETECTION
SECTION 16768A
Page 13