to be in accordance with the recommendations of the manufacturer
of the material being installed, printed copies of these
recommendations shall be submitted prior to installation.
Installation of the item will not be allowed to proceed until the
recommendations are received and approved.
Test Procedures and Reports[; G][; G, [_____]]
Test plans shall define test procedures and tests required to
ensure that the system meets technical, operational, and
performance specifications. The test plans shall define
milestones for the tests, equipment, personnel, facilities, and
supplies required. The test plans shall identify the capabilities
and functions to be tested.
SD-06 Test Reports
Test Procedures and Reports[; G][; G, [_____]]
Test reports, in booklet form showing field test procedures and
field tests performed to adjust each component and field tests
performed to prove compliance with the specified performance
criteria, upon completion and testing of the installed system.
SD-07 Certificates
Fiber Optic System
Manufacturer's certificate indicating compliance with
transmission and reliability requirements. Where equipment or
materials are specified to conform to the standards or
publications and requirements of CFR, ANSI,IEEE, NEMA, NFPA, EIA,
or UL, certificates attesting that the items furnished under this
section of the specification conform to the specified requirements.
SD-10 Operation and Maintenance Data
System Maintenance Course
[Six] [_____] copies of operating instructions outlining the
step-by-step procedures required for system operation including
description of each subsystem in its operating mode. Instructions
shall include the manufacturer's name, service manual, parts list,
and a brief description of equipment, components, and their basic
operating features. [Six] [_____] copies of the maintenance
instructions listing regular maintenance procedures, possible
system failures, a troubleshooting guide for repairs, and
simplified diagrams for the system as installed. A video
describing operating and maintenance instructions may be included.
1.3
SYSTEM DESCRIPTION
1.3.1
General
**************************************************************************
NOTE: Show on drawings the data transmission media
required between each sub-assembly of the system or
systems to be interconnected. Give consideration to
compliance with NEC for supports, raceways, etc.
SECTION 16768A
Page 9
Previous Page
