before the end of the performance verification test.
The course shall
include:
a.
General CCTV hardware, installed system architecture and
configuration.
b.
c.
Operator commands.
d.
e.
Alarm reporting.
f.
Fault diagnostics and correction.
g.
General system maintenance.
h.
Replacement of failed components and integration of replacement
components into the operating CCTV system.
1.6
MAINTENANCE AND SERVICE
**************************************************************************
NOTE: The maintenance and service to be provided by
the Contractor during first year's warranty period
will be included as a separate bid item, and must be
funded with O & M funds. The designer will
coordinate funding requirements with the
installation.
**************************************************************************
1.6.1
General Requirements
The Contractor shall provide all services required and equipment necessary
to maintain the entire CCTV system in an operational state as specified for
a period of 1 year after completion of the endurance test, and shall
provide all necessary material required for the work. Impacts on facility
operations shall be minimized when performing scheduled adjustments or
other unscheduled work.
1.6.2
Description of Work
The adjustment and repair of the CCTV system includes all computer
equipment, software updates, signal transmission equipment, and video
equipment. Provide the manufacturer's required adjustments and all other
work necessary.
1.6.3
Personnel
Service personnel shall be qualified to accomplish all work promptly and
satisfactorily. The Government shall be advised in writing of the name of
the designated service representative, and of any changes in personnel.
1.6.4
Schedule of Work
The Contractor shall perform two inspections at 6-month intervals or less.
This work shall be performed during regular working hours, Monday through
Friday, excluding legal holidays. These inspections shall include:
SECTION 16751A
Page 17