1.5.1
Shop Drawings (SD-02)
Include wiring diagrams and installation details of equipment indicating
proposed location, layout and arrangement, control panels, accessories,
piping, ductwork, and other items that must be shown to ensure a
coordinated installation. Wiring diagrams shall identify circuit terminals
and indicate the internal wiring for each item of equipment and the
interconnection between each item of equipment. Drawings shall indicate
adequate clearance for operation, maintenance, and replacement of operating
equipment devices.
1.5.2
Product Data (SD-03)
Submittal shall include performance and characteristic curves.
1.6
QUALITY ASSURANCE
1.6.1
Regulatory Requirements
In each of the publications referred to herein, consider the advisory
provisions to be mandatory, as though the word, "shall" had been
substituted for "should" wherever it appears. Interpret references in
these publications to the "authority having jurisdiction," or words of
similar meaning, to mean the Contracting Officer. Equipment, materials,
installation, and workmanship shall be in accordance with the mandatory and
advisory provisions of NFPA 70 unless more stringent requirements are
specified or indicated.
1.6.2
Standard Products
Provide materials and equipment that are products of manufacturers
regularly engaged in the production of such products which are of equal
material, design and workmanship. Products shall have been in satisfactory
commercial or industrial use for 2 years prior to bid opening. The 2-year
period shall include applications of equipment and materials under similar
circumstances and of similar size. The product shall have been on sale on
the commercial market through advertisements, manufacturers' catalogs, or
brochures during the 2-year period. Where two or more items of the same
class of equipment are required, these items shall be products of a single
manufacturer; however, the component parts of the item need not be the
products of the same manufacturer unless stated in the technical section.
1.6.2.1
Alternative Qualifications
Products having less than a 2-year field service record will be acceptable
if a certified record of satisfactory field operation for not less than
6000 hours, exclusive of the manufacturers' factory or laboratory tests, is
furnished.
1.6.2.2
Material and Equipment Manufacturing Date
Products manufactured more than 3 years prior to date of delivery to site
shall not be used, unless specified otherwise.
1.7
WARRANTY
The equipment items shall be supported by service organizations which are
reasonably convenient to the equipment installation in order to render
satisfactory service to the equipment on a regular and emergency basis
SECTION 16050N
Page 6
Previous Page
