**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-16050N (August 2004)
-------------------------------
Preparing Activity: NAVFAC
Superseding
UFGS-16050N (February 2003)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL date 23 June 2005
Revised throughout-changes not indicated by CHG tags
**************************************************************************
SECTION 16050N
BASIC ELECTRICAL MATERIALS AND METHODS
08/04
**************************************************************************
NOTE: This guide specification covers electrical
general requirements, complete.
Comments and suggestion on this specification are
welcome and should be directed to the technical
proponent of the specification. A listing of the
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
**************************************************************************
**************************************************************************
NOTE: The following information shall be shown on
the project drawings:
1.
Extent and location of work to be accomplished.
2. Wiring, equipment, and accessories necessary for
a complete installation.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to in the text by the
basic designation only.
SECTION 16050N
Page 3
Previous Page
