ASTM INTERNATIONAL (ASTM)
ASTM D 709
(2001) Laminated Thermosetting Materials
ELECTRONIC INDUSTRIES ALLIANCE (EIA)
TIA/EIA-606-A
(2002) Administration Standard for the
Telecommunications Infrastructure
(ANSI/TIA/EIA-606-A)
INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)
IEEE C2
(2002) National Electrical Safety Code
IEEE Std 100
(2000) The Authoritave Dictionary of IEEE
Standards Terms
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA 250
(2003) Enclosures for Electrical Equipment
(1000 Volts Maximum)
NEMA C57.12.28
(1999) Pad-Mounted Equipment - Enclosure
Integrity
NEMA C57.12.29
(1999; E 2000) Pad-Mounted Equipment -
Enclosure Integrity for Coastal
Environments
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 70
(2005) National Electrical Code
1.2
RELATED REQUIREMENTS
**************************************************************************
NOTE: To apply this guide specification to other
divisions of the project specification, insert the
appropriate division number and title to read such
as: Division 11, "Equipment"; Division 13, "Special
Construction"; Division 14, "Conveying Systems"; and
Division 15, "Mechanical." Ensure that the
appropriate sections having electrical equipment
include the following paragraph:
"1.X RELATED REQUIREMENTS: Section 16050, "Basic
Electrical Materials and Methods," applies to this
section, with the additions and modifications
specified herein."
Delete sections in the last paragraph that are not
in the job. The requirements of this specification
section are being incorporated into the other
specification sections that reference it with the
intent of phasing out this section. As the
requirements of this section are incorporated into
each specification section, that section should be
added to the list in the last paragraph below.
**************************************************************************
SECTION 16050N
Page 4
Previous Page
