Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are for [Contractor Quality Control
approval.] [information only. When used, a designation following the "G"
designation identifies the office that will review the submittal for the
Government.] The following shall be submitted in accordance with Section
01330 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
Layout and Shop Drawings[; G][; G, [_____]]
Installation[; G][; G, [_____]]
Submit layout and shop drawings as specified.
As-Built Drawings[; G][; G, [_____]]
Submit as-built drawings accurately depicting the as-built
configuration of the supplied, installed, and accepted [diesel]
[natural gas fueled] engine pump drive.
SD-03 Product Data
[Diesel] [Natural Gas Fueled] Engine[; G][; G, [_____]]
Cooling System[; G][; G, [_____]]
**************************************************************************
NOTE: In subparagraph "e" below, select the first
option for diesel engines and the second option for
natural gas fueled engines.
**************************************************************************
Submit equipment and performance data certifying that the engine
and cooling system function properly in the ambient temperature
specified and provides the following design and performance data:
a. The maximum allowable inlet temperature of the [coolant
fluid] [coolant air].
b. The minimum allowable inlet temperature of the [coolant
fluid] [coolant air].
c. The maximum allowable temperature rise in the [coolant fluid
through the engine] [cooling air across the engine].
d. The magnitude of monitored values defining alarm or action
set points, and the tolerance (plus and/or minus) at which the
protective device activates the alarm or action.
e. The minimum allowable [inlet fuel temperature] [fuel supply
pressure].
f. The maximum impact/dynamic load that will be transferred
from the engine to the structure.
SECTION 15133A
Page 10
Previous Page
