ASTM A 181/A 181M
(2001) Carbon Steel Forgings, for
General-Purpose Piping
ASTM A 234/A 234M
(2004) Piping Fittings of Wrought Carbon
Steel and Alloy Steel for Moderate and
High Temperature Service
ASTM A 53/A 53M
(2004a) Pipe, Steel, Black and Hot-Dipped,
Zinc-Coated, Welded and Seamless
ASTM B 395/B 395M
(2002) U-Bend Seamless Copper and Copper
Alloy Heat Exchanger and Condenser Tubes
ASTM C 533
(2004) Calcium Silicate Block and Pipe
Thermal Insulation
ASTM D 975
(2004be1) Diesel Fuel Oils
INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)
IEEE C2
(2002) National Electrical Safety Code
MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS
INDUSTRY (MSS)
MSS SP-58
(2002) Pipe Hangers and Supports -
Materials, Design and Manufacture
MSS SP-69
(2002) Pipe Hangers and Supports -
Selection and Application
MSS SP-80
(2003) Bronze Gate, Globe, Angle and Check
Valves
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA ICS 2
(2000; R
2004) Industrial Controls and
Systems:
Controllers, Contactors, and
Overload
Relays Rated Not More than 2000
Volts AC
or 750 Volts DC
NEMA ICS 6
(1993; R 2001) Industrial Control and
Systems: Enclosures
NEMA MG 1
(2003; R 2004) Motors and Generators
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 30
Code
NFPA 37
(2002) Installation and Use of Stationary
Combustion Engines and Gas Turbines
NFPA 70
(2005) National Electrical Code
SECTION 15133A
Page 6
Previous Page
