**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-15133A (August 2004)
---------------------------
Preparing Activity: USACE (CW)
Superseding
UFGS-15133A (February 2003)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated 23 June 2005
Latest change indicated by CHG tags
**************************************************************************
SECTION 15133A
DIESEL/NATURAL GAS FUELED ENGINE PUMP DRIVES
08/04
**************************************************************************
NOTE: This guide specification covers the
requirement for diesel or natural gas fueled engines
used as prime movers for vertical pumps at civil
works flood control pumping stations.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
**************************************************************************
PART 1
GENERAL
**************************************************************************
NOTE: This guide is intended to be used in the
preparation of project specifications along with
UFGS-15131A VERTICAL PUMPS, AXIAL-FLOW AND
MIXED-FLOW IMPELLER-TYPE, and UFGS-15005A SPEED
REDUCERS FOR STORM WATER PUMPS. The Designer should
edit the title of this section to reflect
appropriate project requirements.
The designer is responsible for making a prime mover
selection from either an electric motor, a diesel
engine, or a natural gas engine. The guidance for
making proper selection is contained in EM
1110-2-3105, "Mechanical and Electrical Design of
Pumping Stations".
SECTION 15133A
Page 4
Previous Page
