INTERIOR STEEL / FERROUS SURFACES
miscellaneous metal items] not otherwise specified except floors, hot metal
surfaces, and new prefinished equipment:
1. [High Performance Architectural Latex
[MPI INT 5.1R-G2 (Flat)
Primer:
Intermediate:
Topcoat:
MPI 79
MPI 138
MPI 138
System DFT: 5 mils 125 microns]
[MPI INT 5.1R-G3 (Eggshell)
Primer:
Intermediate:
Topcoat:
MPI 79
MPI 139
MPI 139
System DFT: 5 mils 125 microns]
[MPI INT 5.1R-G5 (Semigloss)
Primer:
Intermediate:
Topcoat:
MPI 79
MPI 141
MPI 141
System DFT: 5 mils 125 microns]]
2. [Alkyd
[MPI INT 5.1E-G2 (Flat)
Primer:
Intermediate:
Topcoat:
MPI 79
MPI 49
MPI 49
System DFT: 5.25 mils 131 microns]
[MPI INT 5.1E-G3 (Eggshell)
Primer:
Intermediate:
Topcoat:
MPI 79
MPI 51
MPI 51
System DFT: 5.25 mils 131 microns]
[MPI INT 5.1E-G5 (Semigloss)
Primer:
Intermediate:
Topcoat:
MPI 79
MPI 47
MPI 47
System DFT: 5.25 mils 131 microns]
[MPI INT 5.1E-G6 (Gloss)
Primer:
Intermediate:
Topcoat:
MPI 79
MPI 48
MPI 48
System DFT: 5.25 mils 131 microns]]
B.
Metal floors (non-shop-primed surfaces or non-slip deck surfaces) with
non-skid additive (NSA), load at manufacturer's recommendations.:
1. [Alkyd Floor Paint
MPI INT 5.1U-G6 (Gloss)
Primer:
Intermediate:
Topcoat:
MPI 79
MPI 27
MPI 27 (+NSA)
System DFT: 5.25 mils 131 microns]
2. [Epoxy
MPI INT 5.1L-G6 (Gloss)
Primer:
Intermediate:
Topcoat:
MPI 101
MPI 77
MPI 77 (+NSA)
System DFT: 5.25 mils 131 microns]
C.
Metal in [toilets], [food-preparation], [food-serving], [restrooms],
[laundry areas], [shower areas], [areas requiring a high degree of
SECTION 09900
Page 63
Previous Page
