INTERIOR STEEL / FERROUS SURFACES
manufacturer's instructions.
System DFT: Per Manufacturer]
H.
[New surfaces and] [Existing surfaces] made bare cleaning to SSPC SP 10
subject to temperatures up to 593 degrees C (1100 degrees F):
1. [High Heat Resistant Coating
MPI INT 5.2D
Primer:
Intermediate:
Topcoat:
MPI 22
Surface preparation and number of coats per
manufacturer's instructions.
System DFT: Per Manufacturer]
**************************************************************************
NOTE: (DIVISION 6: INTERIOR WOOD PAINT TABLE
(Substrates F and G). List other high humidity
areas requiring enamel finishes. For tile-like
finishes, filler materials, and applications, refer
to Section 09963 HIGH-BUILD GLAZE COATINGS. These
high performance coatings are used for
exposure-resistant requirements and can be applied
to wood, metal, and concrete substrates.
**************************************************************************
DIVISION 6:
INTERIOR WOOD PAINT TABLE
A.
New [and Existing, uncoated] Wood and plywood not otherwise specified:
1. [High Performance Architectural Latex
[MPI INT 6.4S-G3 (Eggshell)
Primer:
Intermediate:
Topcoat:
MPI 39
MPI 139
MPI 139
System DFT: 4.5 mils 112 microns]
[MPI INT 6.4S-G4 (Satin)
Primer:
Intermediate:
Topcoat:
MPI 39
MPI 140
MPI 140
System DFT: 4.5 mils 112 microns]
[MPI INT 6.4S-G5 (Semigloss)
Primer:
Intermediate:
Topcoat:
MPI 39
MPI 141
MPI 141
System DFT: 4.5 mils 112 microns]]
2. [Alkyd
[MPI INT 6.4B-G3 (Eggshell)
Primer:
Intermediate:
Topcoat:
MPI 45
MPI 51
MPI 51
System DFT: 4.5 mils 112 microns]
[MPI INT 6.4B-G5 (Semigloss)
Primer:
Intermediate:
Topcoat:
MPI 45
MPI 47
MPI 47
System DFT: 4.5 mils 112 microns]
SECTION 09900
Page 66
Previous Page
