DIVISION 4: INTERIOR CONCRETE MASONRY UNITS PAINT TABLE
[MPI INT 4.2K-G6(Gloss)
Filler:
Primer:
Intermediate:
Topcoat:
MPI 4
N/A
MPI 110-G6
MPI 110-G6
System DFT: 11 mils 275 microns]
Fill all holes in masonry surface]
2. [Alkyd
[MPI INT 4.2N-G3 (Eggshell)
Filler:
Primer:
Intermediate:
Topcoat:
MPI 4
MPI 50
MPI 51
MPI 51
System DFT: 12 mils 300 microns]
[MPI INT 4.2N-G5 (Semigloss)
Filler:
Primer:
Intermediate:
Topcoat:
MPI 4
MPI 50
MPI 47
MPI 47
System DFT: 12 mils 300 microns]
[MPI INT 4.2N-G6 (Gloss)
Filler:
Primer:
Intermediate:
Topcoat:
MPI 4
MPI 50
MPI 48
MPI 48
System DFT: 12 mils 300 microns]
Fill all holes in masonry surface]
3. [Epoxy
MPI INT 4.2G-G6 (Gloss)
Filler:
Primer:
Intermediate:
Topcoat:
MPI 116
N/A
MPI 77
MPI 77
System DFT: 10 mils 250 microns
Fill all holes in masonry surface]
D.
Existing, previously painted, concrete masonry units in [toilets],
[food-preparation], [food-serving], [restrooms], [laundry areas], [shower
areas], [areas requiring a high degree of sanitation], [
], [and
other high humidity areas] unless otherwise specified:
1. [Waterborne Light Industrial Coating
[MPI RIN 4.2G-G3(Eggshell)
Spot Primer:
Intermediate:
Topcoat:
MPI 110-G3
MPI 110-G3
MPI 110-G3
System DFT: 4.5 mils 112 microns]
[MPI RIN 4.2G-G5(Semigloss)
Spot Primer:
Intermediate:
Topcoat:
MPI 110-G5
MPI 110-G5
MPI 110-G5
System DFT: 4.5 mils 112 microns]
[MPI RIN 4.2G-G6(Gloss)
Spot Primer:
Intermediate:
Topcoat:
MPI 110-G6
MPI 110-G6
MPI 110-G6
System DFT: 4.5 mils 112 microns]]
2. [Alkyd
[MPI RIN 4.2C-G3 (Eggshell)
Spot Primer:
Intermediate:
Topcoat:
MPI 50
MPI 51
MPI 51
SECTION 09900
Page 61
Previous Page
