requiring enamel finishes. For tile-like finishes,
filler materials, and applications, refer to Section
09963 HIGH-BUILD GLAZE COATING. These high
performance coatings are normally used to meet
exposure-resistant requirements and can be applied
to wood, metal, and concrete substrates.
**************************************************************************
DIVISION 4:
INTERIOR CONCRETE MASONRY UNITS PAINT TABLE
A.
New [and uncoated Existing] Concrete masonry:
1. [High Performance Architectural Latex
[MPI INT 4.2D-G2 (Flat)
Filler
Primer:
Intermediate:
Topcoat:
MPI 4
N/A
MPI 138
MPI 138
System DFT: 11 mils 275 microns]
[MPI INT 4.2D-G3 (Eggshell)
Filler
Primer:
Intermediate:
Topcoat:
MPI 4
N/A
MPI 139
MPI 139
System DFT: 11 mils 275 microns]
[MPI INT 4.2D-G4 (Satin)
Filler
Primer:
Intermediate:
Topcoat:
MPI 4
N/A
MPI 140
MPI 140
System DFT: 11 mils 275 microns]
[MPI INT 4.2D-G5 (Semigloss)
Filler
Primer:
Intermediate:
Topcoat:
MPI 4
N/A
MPI 141
MPI 141
System DFT: 11 mils 275 microns]
Fill all holes in masonry surface]
2. [Institutional Low Odor / Low VOC Latex
[New; MPI INT 4.2E-G2 (Flat)
Filler
Primer:
Intermediate:
Topcoat:
MPI 4
N/A
MPI 144
MPI 144
System DFT: 4 mils 100 microns]
[New; MPI INT 4.2E-G3 (Eggshell)
Filler
Primer:
Intermediate:
Topcoat:
MPI 4
N/A
MPI 145
MPI 145
System DFT: 4 mils 100 microns]
[New; MPI INT 4.2E-G4 (Satin)
Filler
Primer:
Intermediate:
Topcoat:
MPI 4
N/A
MPI 146
MPI 146
System DFT: 4 mils 100 microns]
[New; MPI INT 4.2E-G5 (Semigloss)
Filler
Primer:
Intermediate:
Topcoat:
MPI 4
N/A
MPI 147
MPI 147
System DFT: 4 mils 100 microns]]
B.
Existing, previously painted Concrete masonry:
SECTION 09900
Page 59
Previous Page
