DIVISION 9:
EXTERIOR STUCCO PAINT TABLE
DIVISION 10:
EXTERIOR CLOTH COVERINGS AND BITUMINOUS COATED SURFACES PAINT
TABLE
A.
Insulation and surfaces of insulation coverings (canvas, cloth, paper):
(Interior and Exterior Applications)
1. [Latex
[MPI EXT 10.1A-G1 (Flat)
Primer:
Intermediate:
Topcoat:
N/A
MPI 10
MPI 10
System DFT: 3.2 mils 80 microns]
[MPI EXT 10.1A-G5 (Semigloss)
Primer:
Intermediate:
Topcoat:
N/A
MPI 11
MPI 11
System DFT: 3.2 mils 80 microns]
[MPI EXT 10.1A-G6 (Gloss)
Primer:
Intermediate:
Topcoat:
N/A
MPI 119
MPI 119
System DFT: 3.2 mils 80 microns]
Topcoat:
Coating to match adjacent surfaces.]
3.14.2
INTERIOR PAINT TABLES
**************************************************************************
NOTE: Consider latex paint options for occupied
buildings and where strong odors would be
objectional. Where allowable, consider eggshell or
semigloss enamel in lieu of flat paint for areas
subject to soiling where gloss is not desired.
For existing surfaces with alkyd enamel coating, do
not specify latex paint which does not bond well to
enamel.
(Division 3:
Interior Concrete Paint Table).
(Substrate B). For hiding imperfections in new
concrete ceilings. Do not specify in wet or humid
areas or for previously painted surfaces.
(Substrate C). List other high humidity areas
requiring enamel finishes. For tile-like finishes,
filler materials, and applications, refer to Section
09963 HIGH-BUILD GLAZE COATING. These high
performance coatings are normally used to meet
exposure-resistant requirements and can be applied
to wood, metal, and concrete substrates.
**************************************************************************
SECTION 09900
Page 55
Previous Page
