EXTERIOR SURFACES, OTHER METALS (NON-FERROUS)
degrees F):
1. [Inorganic Zinc Rich Coating
MPI EXT 5.2C
Primer:
Intermediate:
Topcoat:
MPI 19
Surface preparation and number of coats per
manufacturer's instructions.
System DFT: Per Manufacturer]
2. [Heat Resistant Aluminum Enamel
MPI EXT 5.2B (Aluminum Finish)
Primer:
Intermediate:
Topcoat:
MPI 2
Surface preparation and number of coats per
manufacturer's instructions.
System DFT: Per Manufacturer]
M.
[New surfaces and] [Existing surfaces] made bare cleaning to SSPC SP 10
subject to temperatures up to 593 degrees C (1100 degrees F):
1. [Heat Resistant Coating
MPI EXT 5.2D
Primer:
Intermediate:
Topcoat:
MPI 22
Surface preparation and number of coats per
manufacturer's instructions.
System DFT: Per Manufacturer]
DIVISION 6:
EXTERIOR WOOD; DRESSED LUMBER, PANELING, DECKING, SHINGLES PAINT
TABLE
A.
New [and Existing, uncoated] Dressed lumber, Wood and plywood, trim,
[including top, bottom and edges of doors] not otherwise specified:
1. [Alkyd
[MPI EXT 6.3B-G5 (Semigloss)
Primer:
Intermediate:
Topcoat:
MPI 7
MPI 94
MPI 94
System DFT: 5 mils 125 microns]
[MPI EXT 6.3B-G6 (Gloss)
Primer:
Intermediate:
Topcoat:
MPI 7
MPI 9
MPI 9
System DFT: 5 mils 125 microns]]
2. [Latex
[MPI EXT 6.3A-G1 (Flat)
Primer:
Intermediate:
Topcoat:
MPI 7
MPI 10
MPI 10
System DFT: 5 mils 125 microns]
[MPI EXT 6.3A-G5 (Semigloss)
Primer:
Intermediate:
Topcoat:
MPI 7
MPI 11
MPI 11
System DFT: 5 mils 125 microns]
[MPI EXT 6.3A-G6 (Gloss)
Primer:
Intermediate:
Topcoat:
MPI 7
MPI 119
MPI 119
SECTION 09900
Page 51
Previous Page
