STEEL / FERROUS SURFACES
[Pigmented Polyurethane
b. MPI REX 5.1H-G6 (Gloss)
Spot Primer:
Intermediate:
Topcoat:
MPI 101
MPI 108
MPI 72
System DFT: 8.5 mils 212 microns]]
D.
New [and existing] steel blast cleaned to SSPC SP 10:
1. [Waterborne Light Industrial
[MPI EXT 5.1R-G5 (Semigloss)
Primer:
Intermediate:
Topcoat:
MPI 101
MPI 108
MPI 110-G5
System DFT: 8.5 mils 212 microns]
[MPI EXT 5.1R-G6 (Gloss)
Primer:
Intermediate:
Topcoat:
MPI 101
MPI 108
MPI 110-G6
System DFT: 8.5 mils 212 microns]]
2. [Pigmented Polyurethane
MPI EXT 5.1J-G6 (Gloss)
Primer:
Intermediate:
Topcoat:
MPI 101
MPI 108
MPI 72
System DFT: 8.5 mils 212 microns]
E.
Metal floors (non-shop-primed surfaces or non-slip deck surfaces) with
non-skid additive (NSA), load at manufacturer's recommendations.:
1. [Alkyd Floor Enamel
MPI EXT 5.1S-G6 (Gloss)
Primer:
Intermediate:
Topcoat:
MPI 79
MPI 27
MPI 27 (+NSA)
System DFT: 5.25 mils 131 microns]
EXTERIOR GALVANIZED SURFACES
F.
New Galvanized surfaces:
1. [Cementitious primer / Latex
[MPI EXT 5.3A-G1 (Flat)
Primer:
Intermediate:
Topcoat:
MPI 26
MPI 10
MPI 10
System DFT: 4.5 mils 112 microns]
[MPI EXT 5.3A-G5 (Semigloss)
Primer:
Intermediate:
Topcoat:
MPI 26
MPI 11
MPI 11
System DFT: 4.5 mils 112 microns]
[MPI EXT 5.3A-G6 (Gloss)
Primer:
Intermediate:
Topcoat:
MPI 26
MPI 119
MPI 119
System DFT: 4.5 mils 112 microns]]
2. [Waterborne Primer / Latex
[MPI EXT 5.3H-G1 (Flat)
Primer:
Intermediate:
Topcoat:
MPI 134
MPI 10
MPI 10
SECTION 09900
Page 47
Previous Page
