Color: Main reason for painting concrete masonry is
to obtain desired color. Before specifying paint
systems, coordinate with other specification
sections to confirm that concrete masonry does not
have special waterproof finish or applied, colored
cementitious finish and that it does not have color
pigment integral with mix.
**************************************************************************
DIVISION 4:
EXTERIOR CONCRETE MASONRY UNITS PAINT TABLE
A.
[New] [and Existing] concrete masonry on uncoated surface:
1. [Latex
[New; MPI EXT 4.2A-G1 (Flat) / Existing; MPI REX 4.2A-G1 (Flat)
Block Filler:
Primer:
Intermediate:
Topcoat:
MPI 4
N/A
MPI 10
MPI 10
System DFT: 11 mils 275 microns]
[New; MPI EXT 4.2A-G5 (Semigloss) / Existing; MPI REX 4.2A-G5 (Semigloss)
Block Filler:
Primer:
Intermediate:
Topcoat:
MPI 4
N/A
MPI 11
MPI 11
System DFT: 11 mils 275 microns]
[New; MPI EXT 4.2A-G6 (Gloss) / Existing; MPI REX 4.2A-G6 (Gloss)
Block Filler:
Primer:
Intermediate:
Topcoat:
MPI 4
N/A
MPI 119
MPI 119
System DFT: 11 mils 275 microns]
Topcoat:
Coating to match adjacent surfaces.]
B.
[New] [and Existing] concrete masonry, textured system; on uncoated
surface:
1. [Latex Aggregate
[New; MPI EXT 4.2B-G1 (Flat) / Existing; MPI REX 4.2B-G1 (Flat)
Primer:
Intermediate:
Topcoat:
MPI 42
MPI 42
MPI 10
System DFT: Per Manufacturer]
[New; MPI EXT 4.2B-G5 (Semigloss) / Existing; MPI REX 4.2B-G5 (Semigloss)
Primer:
Intermediate:
Topcoat:
MPI 42
MPI 42
MPI 11
System DFT: Per Manufacturer]
[New; MPI EXT 4.2B-G6 (Gloss) / Existing; MPI REX 4.2B-G6 (Gloss)
Primer:
Intermediate:
Topcoat:
MPI 42
MPI 42
MPI 119
System DFT: Per Manufacturer]
Texture - [Fine] [Medium] [Coarse]. Surface preparation and number of
coats in accordance with manufacturer's instructions. Topcoat: Coating
to match adjacent surfaces.]
C.
[New] [and Existing] concrete masonry, elastomeric system; on uncoated
surface:
1. [Elastomeric Coating
SECTION 09900
Page 44
Previous Page
