DIVISION 5:
EXTERIOR METAL, FERROUS AND NON-FERROUS PAINT TABLE
STEEL / FERROUS SURFACES
A.
New Steel that has been hand or power tool cleaned to SSPC SP 2 or
SSPC SP 3
1. [Alkyd
[New; MPI EXT 5.1Q-G5 (Semigloss) Existing; MPI REX 5.1D-G5
Primer:
Intermediate:
Topcoat:
MPI 23
MPI 94
MPI 94
System DFT: 5.25 mils 131 microns]
[New; MPI EXT 5.1Q-G6 (Gloss) / Existing; MPI REX 5.1D-G6
Primer:
Intermediate:
Topcoat:
MPI 23
MPI 9
MPI 9
System DFT: 5.25 mils 131 microns]]
B.
New Steel that has been blast-cleaned to SSPC SP 6:
2. [Alkyd
[New; MPI EXT 5.1D-G5 (Semigloss) / Existing; MPI REX 5.1D-G5
Primer:
Intermediate:
Topcoat:
MPI 79
MPI 94
MPI 94
System DFT: 5.25 mils 131 microns]
[New; MPI EXT 5.1D-G6 (Gloss) / Existing; MPI REX 5.1D-G6
Primer:
Intermediate:
Topcoat:
MPI 79
MPI 9
MPI 9
System DFT: 5.25 mils 131 microns]]
C.
Existing steel that has been spot-blasted to SSPC SP 6:
1. [Surface previously coated with alkyd or latex:
[Waterborne Light Industrial Coating
MPI REX 5.1C-G5 (Semigloss)
Spot Primer:
Intermediate:
Topcoat:
MPI 79
MPI 110-G5
MPI 110-G5
System DFT: 5 mils 125 microns]
[MPI REX 5.1C-G6 (Gloss)
Spot Primer:
Intermediate:
Topcoat:
MPI 79
MPI 110-G6
MPI 110-G6
System DFT: 5 mils 125 microns]]
2. [Surface previously coated with epoxy:
[Waterborne Light Industrial
a. MPI REX 5.1L-G5 (Semigloss)
Spot Primer:
Intermediate:
Topcoat:
MPI 101
MPI 110-G5
MPI 110-G5
System DFT: 5 mils 125 microns]
[MPI REX 5.1L-G6 (Gloss)
Spot Primer:
Intermediate:
Topcoat:
MPI 101
MPI 110-G6
MPI 110-G6
System DFT: 5 mils 125 microns]
SECTION 09900
Page 46
Previous Page
