material.] As required, provide welding rods as recommended by the
manufacturer for heat welding of joints.
2.3
RUBBER TILE [TYPE [A] [_____]]
**************************************************************************
NOTE: Rubber flooring provides slip resistance not
usually found with other type floor tiles. Consider
for areas such as stairwell landings and ramps.
Rubber flooring has a cushioning quality that
reduces leg weariness and fatigue.
Some rubber flooring is not resistant to oil and
grease and can perform poorly against certain
reagents and stain spills. Determine project needs,
research available product and add verbiage to
paragraph if rubber flooring needs to be resistant
to oil and grease and perform against certain
reagents and stain spills.
Research available sizes. Manufacturers sizes vary
and not all manufacturers offer all sizes.
**************************************************************************
Rubber tile shall conform to ASTM F 1344 [Class 1 homogeneous] [Class 2
layered], [Type A (solid color)] [Type B (through mottled)], [300] [450]
[600] [900] [_____] mm [12] [18] [24] [36] [_____] inches square. Surface
shall be [smooth] [_____] [raised [round] [square] [diamond] studs with
chamfered edges. Stud profile shall be [high] [low]]. Overall thickness
shall be [3.2] [_____] mm [0.125] [_____] inch thick.
2.4
RUBBER SHEET FLOORING [TYPE [A] [_____]]
**************************************************************************
NOTE: Rubber sheet flooring provides slip
resistance not usually found with other type floor
tiles. Consider for areas such as stairwell
landings and ramps. Rubber flooring has a
cushioning quality that reduces leg weariness and
fatigue.
Some rubber flooring is not resistant to oil and
grease and can perform poorly against certain
reagents and stain spills. Determine project needs,
research available product and add verbiage to
paragraph if rubber flooring needs to be resistant
to oil and grease and perform against certain
reagents and stain spills.
The following thicknesses of rubber flooring are
recommended for the traffic type shown: 2.0 mm
(0.080 inch) thickness - low traffic; 2.5 mm (0.100
inch) thickness - medium traffic; 3 mm (0.118 inch)
thickness or greater - heavy traffic.
Research available widths. Manufacturers widths
vary and not all manufacturers offer all sizes.
**************************************************************************
SECTION 09650
Page 10
Previous Page
