delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
following the "G" typically are not used for Navy
projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are [for Contractor Quality Control
approval.][for information only. When used, a designation following the
"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
**************************************************************************
NOTE: Drawings are required for projects with floor
patterns.
**************************************************************************
Resilient Flooring and Accessories[; G][; G, [_____]]
Scaled drawings indicating patterns (including location of
patterns and colors) and dimensions.
SD-03 Product Data
Resilient Flooring and Accessories[; G][; G, [_____]]
Manufacturer's descriptive data.
Adhesives
Manufacturer's descriptive data, documentation stating physical
characteristics, and mildew and germicidal characteristics.
Material Safety Data Sheets (MSDS) for all primers and adhesives
shall be provided to the Contracting Officer. Highlight VOC
emissions.
SD-04 Samples
SECTION 09650
Page 6
Previous Page
