type underlayment.
Flooring such as nonslip tile and cork tile are not
included in this specification; appropriate wording
must be added when those tiles are required.
Show location of resilient flooring, including
types, on the drawings.
**************************************************************************
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM D 4078
(2002) Water Emulsion Floor Polish
ASTM E 648
(2003) Critical Radiant Flux of
Floor-Covering Systems Using a Radiant
Heat Energy Source
ASTM F 1066
(2004) Vinyl Composition Floor Tile
ASTM F 1303
(2004) Sheet Vinyl Floor Covering with
Backing
ASTM F 1344
(2004) Rubber Floor Tile
ASTM F 1482
(2004) Installation and Preparation of
Panel Type Underlayments to Receive
Resilient Flooring
ASTM F 1700
(2004) Solid Vinyl Floor Tile
ASTM F 1859
(2004) Rubber Sheet Floor Covering Without
Backing
ASTM F 1860
(2004) Rubber Sheet Floor Covering With
Backing
ASTM F 1861
(2002) Resilient Wall Base
ASTM F 1869
(2004) Measuring Moisture Vapor Emission
Rate of Concrete Subfloor Using Anhydrous
Calcium Chloride
ASTM F 1913
(2004) Vinyl Sheet Floor Covering Without
SECTION 09650
Page 4
Previous Page
