a.
Call Code 106.322 dispatcher, at 396-7231 ext. 161 and provide the
following information:
(1)
Your name and company
(2)
Service/contract number
(3)
ROICC/Code 460 number
(4)
Telephone number where you can be reached
(5)
Material requiring disposal
(6)
Location of material
(7)
Volume of material in each container
b.
All material must meet the following conditions in order to be
acceptable for disposal
(1) Drums compatible with waste contents and drums meet DOT
requirements for 49 CFR 173 for transportation of materials.
(2) Drums banded to wooden pallets. No more than three (3) 55
gallon drums to a pallet, or two (2) 85 gallon over packs.
(3)
Band using 1-1/4 inch minimum band on upper third of drum.
(4) Recovery materials label (provided by Code 106.321) located
in middle of drum, filled out to indicate actual volume of
material, name of material manufacturer, other vendor information
as available.
(5) Always have three (3) to five (5) inches of empty space above
volume of material. This space is called 'outage'.
(b)
Responsibilities for Government's Disposal
Any generation of WHM/HW requiring Government disposal of solid waste or
liquid.
Contractor's Representative
a.
Contain all
waste in accordance with 40 CFR 260, 40 CFR 261, 40
CFR 262, 40
CFR 263, 40 CFR 264, 40 CFR 265, 40 CFR 266, 40 CFR 268,
40 CFR 270,
40 CFR 271, 40 CFR 272, 40 CFR 273, 40 CFR 279, 40 CFR
280, and 40
CFR 716.
b.
Control and turn-in all hazardous waste requiring disposal in
accordance with NNSY Recovery Material Instruction contained in
the specification entitled "Government Disposal Turn-In
Requirements".
c.
Providing identification of material requiring disposal to permit
safe opening, storage and handling by the Government.
Government Responsibilities
SECTION 01575N
Page 26
Previous Page
