referenced to the chemical analysis performed.
b.
Analysis
The Contractor will follow the analytical procedure and methods in
accordance with the 40 CFR 261. The Contractor will provide all
analytical results and reports performed to the Contracting Officer
c.
Analysis Type
Identification of waste hazardous material/hazardous waste will be
accomplished by analyzing for the following properties as a
minimum: ignitability, corrosiveness, total chlorides, BYTU value,
PCBs, TCLP for heavy metals, and cyanide.
][3.5.1.3
Asbestos Certification
**************************************************************************
NOTE: Add for Norfolk Naval Shipyard projects
**************************************************************************
a.
Asbestos containing material: Items, components, or materials
which are specified to be worked on under this contract [do] [do
not] involve asbestos. Other materials especially thermal
insulation, in the general work area may [also] contain asbestos.
All thermal insulation, in all work areas should be considered to
be asbestos unless positively identified by conspicuous tags or
previous laboratory analysis certifying asbestos free. The
Contractor will not remove or perform work on any such materials
without the prior approval of the Contracting Officer. The
Contractor will not engage in any activity, which would remove or
damage such materials of cause the generation of fibers from such
materials. The Contractor will immediately stop all work which
would generate further damage to the material, evacuate the
potential asbestos exposed area, and notify the Contracting
Officer for resolution of the situation prior to resuming normal
work activities in the affected area.
][3.5.1.4
Hazardous Waste Disposal
**************************************************************************
NOTE: Add for Norfolk Naval Shipyard projects.
**************************************************************************
COMPLETE AS APPLICABLE WITH THE DETAILS OF THE CONTRACT. THE
SECTIONS WITH () SHOULD BE MARKED AS APPLICABLE WITH AN 'X'.
Controlled of stored waste, packaging, sampling, analysis, and disposal
will b determined by the details in the contract. The requirements for
jobs in the following paragraphs will be used as the guidelines for
disposal of any hazardous waste generated.
(a)
Responsibilities for Contractor's Disposal
Any generation of WHM/HW requiring Contractor disposal of solid
waste or liquid.
a.
The Contractor agrees to provide all service necessary for the
final treatment/disposal of the hazardous material/waste in
SECTION 01575N
Page 24
Previous Page
