a.
Sample material requiring disposal.
b.
Analyzing each sample taken.
c.
Determine the DOT proper shipping names for all waste (each
container requiring disposal) and will demonstrate how this
determination is developed and supported by the sampling and
analysis requirements.
d.
Accepting and disposing of all WHM/HW/HW properly turned in by the
Contractor for disposal.
Acceptance of WHM/HW for Disposal
Upon completion of all above applicable requirements (i.e. sample,
analysis, identification, packaging, etc.), the Contractor will notify the
Contracting Officer three (3) working days in advance for review and
acceptance by the Environmental Programs Division, Code 106.3. The
Contractor will correct all discrepancies not conforming to this contract
at his expense. Upon acceptance by the Environmental Programs, the waste
will be removed from the Contractor's work site within three (3) days.
Interim Waste Generation Site for Government Disposal of WHM/HW
The Contractor will request approval of the Government for an area suitable
for packaging WHM/KHW requiring disposal. The area will be barricaded and
a sign identifying as follows:
Signage- "DANGER - UNAUTHORIZED PERSONNEL KEEP OUT"
With additional custody sign indicating:
(1)
Site #
(2)
Controlled by
(3)
Call Mr./Ms. [____] at
Barricade Type: Yellow and black three (3) inch plastic tape.
Corner
barricades will be provided by the Government.
Government Disposal Turn-In Requirements
a.
Call Code 106.322 dispatcher, at 396-7231 ext. 161 and provide the
following information:
(1)
Your name and company
(2)
Service/contract number
(3)
ROICC/Code 460 contact number
(4)
Telephone Number where you can be reached
(5)
Material requiring disposal
(6)
Location of material
(7)
Volume of material in each container
b.
All material must meet the following conditions in order to be
SECTION 01575N
Page 27
Previous Page
