Movement and Exit

exit through Gate 2.

(3) Common contract and commercial trucks which enter the base

may depart through Gate 5, Gate 4, and Gate 22 only. The exit

Truck Control Point at Gate 4 is operated from 7:00 a.m. to 5:00

p.m.

(4) For concrete- and asphalt-carrying trucks, the Resident

Officer in Charge of Construction (ROICC), Norfolk VA shall

arrange entry and exit through any gate other than Gate 2.

(5) Contractor vehicles with black Norfolk Naval Base decals

shall be granted routine access to the base at all times. These

trucks shall not enter or exit the base through Gate 2. These

trucks are subject to random checks and searches at exit gates

like other personal and commercial vehicles to ensure that

Government property is not being taken off the base without

authorization and documentation.

c.

Movement and Exit

(1) Material movement control and gate pass. A Material Movement

Control and Gate Pass (5ND GEN 5510/1) is required for the removal

of Government, public, or private property from NAVSTA and NAS

Norfolk complex via commercial vans and truck.

(a) The Material Movement Control and Gate Pass shall be

originated by the Naval Base Police Truck Control Officer, and

shall be given to drivers of commercial trucks for retention

during transit to intermediate stops and to the exit gates. The

pass shall be presented by the driver to the Truck Control Officer

at the exit truck stop. If the driver has more than one delivery

or pickup point, the driver shall present the pass at each stop so

the new activity may fill in appropriate information on the pass.

A copy of the pass shall be retained by each activity after

appropriate information has been entered; remaining copies of the

pass shall be returned to the driver. Passes are subject to

review by the Naval Base Police Department during transit and

within command areas by activity officials for verification of

cargo content and to determine if drivers are transiting promptly

and by the proper route. For trailers expecting to be picked up

and depart outside normal working hours, pre-prepared passes shall

be provided by the activity duty officer or authorized supervising

person prior to close of working hours. Trucking companies

expecting to pick up trailers after working hours should be

instructed to pick up a Material Movement Control and Gate Pass

from the responsible activity. The activity duty officer or

official shall notify Base Police Headquarters to clear the truck

for exit at Gate 5 if the seal and Material Movement Control and

Gate Pass are in order.

(b) When filling out a Material Movement Control and Gate Pass,

the last activity where business is conducted on the base is

responsible to ensure that the original of the pass is given to

the driver to turn in to the Truck Control officer at the truck

control stops.

(c) The Material Movement Control and Gate Pass shall be turned

in by the vehicle driver to a base police officer at a truck

SECTION 01500N

Page 13