applicable CFR technical standards.
1.6
DELIVERY, STORAGE AND HANDLING
1.6.1
Protection
All products delivered and placed in storage shall be stored with
protection from the weather, humidity and temperature variation, dirt and
dust, or other contaminants.
1.6.2
Delivery Coordination
Coordinate deliveries with the Contracting Officer to insure a timely
installation.
1.6.3
Loss Liability
The system Contractor shall be liable for any loss due to delivery and
storage problems.
1.6.4
Delivery Restrictions
a. No products or installation material shall be delivered to the job site
more than one month prior to commencement of its installation.
b. System products shall not leave the factory prior to six months before
the time that the facility is ready for installation of the products.
Obtain prior written approval of the shipping date from the Contracting
Officer.
1.6.5
Contractor Responsibility
The system Contractor shall be responsible for all handling and control of
products provided under this contract.
1.7
SEQUENCING AND SCHEDULING
a. Each part of the system shall be installed and phased into operation as
required by the project schedule.
b. Schedule and coordinate work with all other trades and suppliers whose
work is critical to the successful installation of the system.
c. Furnish and install all required items for a complete and operating
installation so as to cause no delay in work by Others, or completion of the
facility project.
d. Final inspection and acceptance testing of each system shall be performed
after the system installation and commissioning has been completed.
1.8
WARRANTY
a. Guarantee the operational and physical integrity of the provided system,
including a warranty against all defects in design, equipment, materials,
software, workmanship, and improper installation and adjustments, for a
period of at least one year from the date that the fully operational system
is accepted by the Government after satisfactory completion of final
inspection and acceptance tests. This warranty shall not cover any
malfunctions or damage caused by misuse, abuse or neglect. If the system
SECTION 16731A
Page 35
Previous Page
