(6)
Steam rating of plant:
[_____] kg/sec lb/hr
(a)
Maximum continuous rating of boiler No. 1 [_____] kg/sec lb/hr
(b)
Maximum continuous rating of boiler No. 2 [_____] kg/sec lb/hr
[(c) Maximum continuous rating of boiler No. 3 [_____] kg/sec
lb/hr]
[(d) Maximum continuous rating of boiler No. 4 [_____] kg/sec
lb/hr]
(7)
Coal Analysis
(a)
Ash:
[_____] percent
(b)
Carbon:
[_____] percent
(c)
[_____] percent
(d)
Sulfur:
[_____] percent
(e)
Moisture:
[_____] percent
(f)
[_____] percent
(g)
Oxygen:
[_____] percent
(8)
Ash Analysis
(a)
Carbon:
[_____] percent
(b)
Calcium:
[_____] percent
1.4.1.11
Deaerating Heater
a.
Design pressure:
207 kPa (gage) 30 psig
b.
Normal steam operating pressure:
[_____] kPa (gage) psig
c.
Maximum steam operating pressure:
[_____] kPa (gage) psig
d.
Capacity (minimum):
[_____] kg/sec lb/hr of feedwater
e.
Inlet Conditions at Heater:
Maximum
Pressure
Temperature
Flow Rate
kPa(gage)
Range Degrees C
kg/sec
(1)
Condensate return
[_____]
[_____ to _____]
[_____]
(2)
[_____]
[_____ to _____]
[_____]
trap returns
(3)
Makeup water
[_____]
[_____ to _____]
[_____]
(softened)
SECTION 15501N
Page 27
Previous Page
