information to be shown on the drawings instead.
**************************************************************************
a.
Transfer pumps (for fuel oil tank truck or railroad tank car
unloading and transfer to tanks):
(1)
Number of assemblies:
[_____]
(2)
Tag numbers:
As indicated
(3)
Capacity each:
[_____] L/s gpm at 450 ssu
(4)
Suction lift required:
[_____] kPa ft of water
(5)
Discharge pressure:
[_____] kPa (gage) psig
(6) Operating temperature: [27 to 54] [_____ to _____] degrees C
[80 to 130] [_____ to _____] degrees F
(7)
Viscosity range:
[450 to 5000] [_____ to ____] ssu
(8)
Specific gravity:
[.92 to .99] [_____ to ____]
(9)
Viscosity at brake power selection point:
[9000] [_____] ssu
(10) Maximum pump speed:
1750 rpm
(11) Motor kW hp:
[_____]
(12) Fuel oil:
No. [6, low sulfur] [_____]
b.
Transfer pumps (for fuel oil transfer from tanks to heating plant):
(1)
Number of assemblies:
[_____]
(2)
Tag numbers:
As indicated
(3)
Capacity:
[_____] L/s gpm at 450 ssu
(4)
Suction lift required:
[_____] kPa ft of water
(5)
Discharge pressure:
[_____] kPa (gage) psig
(6) Operating temperature:
[49] [_____] degrees C [120] [_____]
degrees F
(7)
Viscosity range:
[450 to 3000] [_____ to _____] ssu
(8)
Specific gravity:
[.92 to .99] [_____ to _____]
(9)
Viscosity at brake power selection point:
[5000] [_____] ssu
(10) Maximum pump speed:
1750 rpm
(11) Motor kW hp:
[_____]
(12) Fuel oil:
No. [6, low sulfur] [_____]
c.
Fuel oil recirculation pump sets (at remote storage):
SECTION 15501N
Page 23
Previous Page
