2.4.2
Hand-Held Shower Head
ASSE 1014, [fixed] [adjustable] spray hand-held shower head with swivel
fitting, [pushbutton flow control,] 1525 mm 60 inch minimum flexible
[chrome plated copper alloy] [polished stainless steel] hose and in-line
vacuum breaker [wall bracket to mount hand spray] [[635 mm][25 inch]
[_____]] [grab bar with sliding spray holder that locks at any height] to
allow the use of the unit as either a hand-held spray or a fixed shower
head.
2.4.3
Bathtub, Pier Type (Item P1050)
ASME A112.19.1M, acid-resisting enameled cast iron for mounting on
[masonry] [enameled cast iron] base; 1675 mm 66 inches long by 760 mm 30
inches wide by 460 mm 18 inches deep; with the rim 710 mm 28 inches,
including base, above the floor. Provide with built-in shampoo fitting,
pop-up drain fitting, elevated vacuum breaker, over-rim diverter spout,
spray nozzle with 1.50 meters 5 feet of reinforced rubber hose and wall
hook, and supply valves.
2.4.4
Rinse Valve, Bedpan (Item P1100)
Wall mounted self-closing [hand operated] [hinged pedal action foot
control] mixing valve with integral stops. Rinse valve shall be provided
with [cold] [hot] [hot and cold] water volume control, elevated vacuum
breaker, 1.25 meters 4 feet of flexible hose, spray nozzle with wall hook,
and [loose key supply] [screwdriver] stop valves.
2.4.5
Fountain, Eyewash (Item P1950)
ANSI Z358.1, floor mounted, hand operated type. Provide with quick opening,
15 mm 1/2 inch chrome plated copper alloy full-flow valves, twin eyewash
heads with pop-off dust covers, stainless steel eyewash receptor, and drain.
2.4.6
Fountain, Eyewash/Shower (Item P2050)
ANSI Z358.1, pedestal mounted, twin eyewash heads with pop-off dust covers,
stainless steel receptor, 15 mm 1/2 inch chrome plated copper alloy hand
operated stay open ball valve, and hand spray unit. Provide hand spray
unit with hose guide bracket, wall mounting flange, 1.75 meters 6 feet of
coiled reinforced hose with minimum burst strength of 1725 kPa (gage) 250
psig, noncorrosive spray head, and hand squeeze valve with hold open
feature.
2.4.7
Valve, Thermostatic Mixing (Item P2450)
Thermostatic mixing valve, assembly with washout hose. To be used with
portable whirlpool equipment. Thermostatic valve to maintain temperature
between 21 and 43 degrees C 70 and 110 degrees F, with a flow rate of 0.50
to 1.25 liters per second 10 to 20 gallons a minute.
2.4.8
Lavatory, Wrist Control (Item P3450)
ASME A112.19.2M, wall mounted, 510 mm 20 inches long by 460 mm 18 inches
wide, vitreous china, slab type. Provide with combination faucets with 100
mm 4 inch wrist control handles, gooseneck spout with aerator, open drain
with perforated strainer, [angle] [straight] stops, and 32 mm 1 1/4 inch
cast brass adjustable P-trap with tailpiece.
SECTION 15411N
Page 8
Previous Page
