PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI Z358.1
(1998) Emergency Eyewash and Shower
Equipment
AMERICAN SOCIETY OF SANITARY ENGINEERING (ASSE)
ASSE 1014
(1989) Hand-Held Showers
AMERICAN WATER WORKS ASSOCIATION(AWWA)
AWWA C651
(1999) Disinfecting Water Mains
ASME INTERNATIONAL (ASME)
ASME A112.18.1M
(2000) Plumbing Fixture Fittings
ASME A112.19.1M
(1994; R 2004) Enameled Cast Iron Plumbing
Fixtures
ASME A112.19.2M
(2003) Vitreous China Plumbing Fixtures
ASME A112.19.3M
(2001) Stainless Steel Fixtures (Designed
for Residential Use)
ASME A112.19.5
(1999) Trim for Water-Closet Bowls, Tanks
and Urinals
ASME A112.6.1M
(1997; R 2002) Floor Affixed Supports for
Off-the-Floor Plumbing Fixtures for Public
Use
INTERNATIONAL CODE COUNCIL (ICC)
ICC IPC
(2003)International Plumbing Code
U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)
29 CFR 1910.1200
Hazard Communication
SECTION 15411N
Page 4
Previous Page
