2.4.20
Trap, Plaster, Large (Item P7600)
Gray cast-iron body 355 mm 14 inches long by 355 mm 14 inches wide by 406 mm
16 inches high, with white porcelain-enamel inside and outside, clamps,
cage of galvanized material, brass screens, and 50 mm 2 inch inlet and
outlet connections fitted with hood seal.
2.4.21
Lavatory, Disturbed Patient (Item P9160)
Vitreous china with integral faucet and soap dish, drain outlet, and
drinking nozzle, with self-closing, push button, hot and cold water faucets.
2.4.22
Lavatory, Wheelchair (Item P9180)
ASME A112.19.2M, wall mounted, vitreous china, 510 mm 20 inches long by 685
mm 27 inches wide, slab type provided with [combination] [centerset]
lavatory faucets, gooseneck spout, 100 mm 4 inch wrist control handles,
open drain with perforated strainer, [angle][straight] stops, and 32 mm 1
1/4 inch cast brass adjustable P-trap with tailpiece.
2.4.23
Floor Drain Attachment (Item P9320)
With automatic trap primer on the outlets of
floor drains in hydro-therapy
rooms. Floor drain attachment shall be [50]
[80] [100] mm [2] [3] [4] inch
tapping and [threaded] [caulk]
outlet. Automatic trap primer shall be cast
bronze with 15 mm 1/2 inch
[threaded] [solder] connections.
2.4.24
Water Closet, Neuropsychiatric (NP) Patient (Item P9400)
ASME A112.19.2M, floor mounted with wax gasket, vitreous china, siphon jet,
elongated bowl and 40 mm 1 1/2 inch back inlet spud, with concealed
elongated open-front seat, and ANSI large diaphragm (not less than 66.70 mm
2.625 inches upper chamber inside diameter at the point where the diaphragm
is sealed between the upper and lower chambers), nonhold-open flush valve
of chrome plated copper alloy, including vacuum breaker and angle
(control-stop) valve with back check, operated by a push button mounted
through the wall. Seat shall be elongated, without cover, and white solid
plastic with open front and check hinge.
2.4.25
Water Closet, Specimen (Item P9520)
ASME A112.19.2M, floor mounted with wax gasket, vitreous china, siphon jet,
elongated bowl, and 40 mm 1 1/2 inch brass top spud, elongated bowl, and 40
mm 1 1/2 inch back inlet spud, with concealed elongated open-front seat,
and ANSI large diaphragm (not less than 66.70 mm 2.625 inches upper chamber
inside diameter at the point where the diaphragm is sealed between the
upper and lower chambers), nonhold-open flush valve of chrome plated copper
alloy, including vacuum breaker and angle (control-stop) valve with back
check, with lever operator. Bowl shall be capable of receiving a full size
bedpan. [Rim of bowl shall be 430 to 480 mm 17 to 19 inches above the
floor for wheelchair patients.] Seat shall be elongated, white solid
plastic, open front without cover.
2.4.26
Cleaner, Whirlpool (Item P9560)
Exposed, wall mounted with stationary hose rack, rubber hose, and vacuum
breaker; 735 mm 29 inches high, 406 mm 16 inches wide.
Provide brass
hot and cold water supply valves with control stops.
SECTION 15411N
Page 11