for each system and shall include the following information in a report
with conclusion as to the adequacy of the system:
a.
Time, date, and duration of test.
b.
Water pressures at remotest and highest fixtures.
c.
Operation of all fixtures and fixture trim.
d.
Operation of all valves, flush valves, and faucets.
e.
Operation of all floor and shower drains by flooding with water.
f.
Operation of plaster interceptor.
g.
Operation of vacuum breakers.
h.
Complete operation of automatic scrub station, including water
temperature, water pressure, and electronic timer.
All indicating instruments shall be read at half-hour intervals unless
otherwise directed by the Contracting Officer. [Four] [Six] copies of the
test report shall be supplied to the Contracting Officer.
3.4
FIELD INSPECTION
Inspection shall continue during installation and testing. The right is
reserved to inspect any equipment at the manufacturer's facility, during or
after manufacture, and to require reasonable witness tests before shipment.
A final inspection of the equipment shall be performed prior to
installation to determine conformity to the type, class, grade, size,
capacity, and other characteristics specified herein or indicated. All
equipment rejected shall be corrected or replaced prior to installation.
3.5
SCHEDULE
Some metric measurements in this section are based on mathematical
conversion of inch-pound measurement, and not on metric measurement
commonly agreed to by the manufacturers or other parties. The inch-pound
and metric measurements shown are as follows:
Products
Inch-Pound
Metric
Measurement
Measurement
a.
Bath, Size
27
x 23 x 21 in.
685 x 585 x 535 mm
b.
Hand Held Shower
60
in. flex. hose
1525 mm flex. hose
c.
Bathtub
66
x 30 x 18 in.
1675 x 760 x 460 mm
d.
Lavatory (Wall Mount)
20
x 18 in.
510 x 460 mm
e.
Lavatory (Surgeon's)
28
x 20 x 3 5/8 in.
710 x 510 x 90 mm
f.
Sink (SS Countertop)
25
x 22 x 7 1/2 in.
635 x 560 x 190 mm
g.
Service Sink (Pedestal)
20
x 20 x 18 in.
510 x 510 x 460 mm
h.
Service Sink (Wall Mount)
22
x 26 x 10 1/2 in.
560 x 660 x 270 mm
i.
Sink (Surgeon's Scrub)
30
x 22 x 10 in.
760 x 560 x 250 mm
j.
Labatory (Wheelchair)
20
x 27 in.
510 x 685 mm
-- End of Section --
SECTION 15411N
Page 13
Previous Page
