a.
Specification title, number and date:
As listed hereinbefore
under "REFERENCES."
b.
Type: [I - Single acting (reciprocating)] [II - Double acting
(reciprocating)] [III -Rotary (vane, screw)].
c.
Issue date of applicable specifications and standards:
As
specified.
d.
Packaged assembly requirement:
[Packaged Unit required] [Field
assembled].
e.
First article inspection:
[Not required; furnish certified test
report.] [Required.]
f.
Capacity (cms) (cfm):
[At least as indicated.] [cmscfm:_____.]
Discharge working pressure:
[At least as indicated.] [kPa (gage)
psig: _____.]
g.
Number of stages for Type I compressor:
[Single stage.]
Type I
[Two stages.].
Water-jacketed cooling:
[Not applicable.]
[Required] [Not
required].
h.
Number of stages for Type II compressor:
[Single Stage] [Two
stages] [Not applicable].
i.
Oil-free air delivery Type II compressors:
[Required.]
Type II
[Not required.]
j.
Type bearings:
Manufacturer's standard.
k.
Air filter to function as muffler:
Required.
l.
Air Filter conformance with MS:
Not required; provide
manufacturer's standard.
m.
Safety valve in discharge line when no receiver provided: [Not
applicable.] [Required, ASME BPVC SEC VIII D1 and ASME BPVC SEC IX
Code stamped safety relief valve.]
n.
Shut-off valve on compressor discharge: [Not required]
[Required].
o.
Oil Filter compliance with FS F-F-351:
Not required; provide
manufacturer's standard.
p.
Drain plug conformance with MS:
Not required; provide
manufacturer's standard.
q.
Electric, thermostatically controlled immersion oil heater:
[Not]
required.
r.
Compressor regulation method: [Constant-speed control]. [Dual
control: Alternative constant speed or automatic start-stop.]
s.
Timed stop control (for constant speed control:
[Not applicable]
[Required].
SECTION 15211N
Page 13
Previous Page
