Air dryer, Data Package 4
Submit in accordance with Section 01781 OPERATION AND
MAINTENANCE DATA.
SD-11 Closeout Submittals
Posted operating instructions for air compressor
Posted operating instructions air dryer
1.4
QUALITY ASSURANCE
**************************************************************************
NOTE: The SMACNA Seismic Restraint Manual
referenced in the paragraph below shall be applied
to locations subject to significant risk of seismic
induced loads. The degree to which this manual is
to be used for contract drawings and specifications
shall be determined by the designer of record in
coordination with the NAVFAC Engineering Field
Division's Mechanical Design Branch.
**************************************************************************
Provide work specified in this section, including design, materials,
fabrication, assembly, erection, installation, and examination, inspection
and testing of compressed air systems in conformance with ASME B31.9[ and
SMACNA Seismic Restraint Mnl], as modified and supplemented by this
specification section and accompanying drawings. In ASME B31.1, ASME BPVC
SEC VIII D1, and ASME BPVC SEC IX, the advisory provisions shall be
considered mandatory, as though the word "shall" had been substituted for
"should" wherever it appears; reference to the "authority having
jurisdiction" and "owner" shall be interpreted to mean the Contracting
Officer.
1.4.1
Welding procedures and qualifications
Provide welding work specified in this section for compressed air piping
systems in conformance with ASME B31.9, as modified and supplemented by
this specification section and the accompanying drawings.
The welding
work includes: qualification of welding procedures, welders, welding
operators, and nondestructive examination personnel; maintenance of welding
records, and examination methods for welds.
1.4.1.1
Butt Welded Joints
Butt welded joints shall be full penetration joints.
1.4.2
Employer's Record Documents
Submit to the ROICC for his review and approval the following
documentation. This documentation and the subject qualifications shall be
in compliance with ASME B31.9.
a.
List of qualified welding procedures that is proposed to be used
to provide the work specified in this specification section.
b.
List of qualified welders, and welding operators that are proposed
SECTION 15211N
Page 10
Previous Page
