with wiring configuration identified where applicable.
j. Reflected ceiling plan for projects specified with power
poles.
1.4
DELIVERY, STORAGE, AND HANDLING
Components shall be delivered to the jobsite in the manufacturer's original
packaging with the brand, item identification, and project reference
clearly marked thereon. Components shall be stored in a dry location that
is adequately ventilated and free from dirt and dust, water, and other
contaminants, and in a manner that permits easy access for inspection and
handling.
1.5
PATTERN AND COLOR
**************************************************************************
NOTE: Include a reference to Section 09915 COLOR
SCHEDULE or drawings for all items requiring a
finish color. This includes the following items
when applicable: Work surfaces, Pedestals and
Drawers, Flipper Doors, Tackboards, Panel Supported
Storage, Panels, Stacking Panel Frames, Spine walls,
Screens, Connectors, Trim and Accessories. Specify
both sides of panels, stacking panel frames and
spine walls.
**************************************************************************
Pattern and color of finishes and fabrics for panels [and spine walls],
components, and trim shall be [in accordance with Section 09915 COLOR
SCHEDULE] [as shown on the drawings] [_____].
1.6
ALTERNATE DESIGN
**************************************************************************
NOTE: Minor differences exist among different
manufacturer's product. This paragraph pertaining
to an "alternate design" was written in order not to
exclude a manufacturer when an equally acceptable
solution is proposed. List minimum requirements if
applicable to the project. Examples of minimum
project requirements might include: minimum linear
footage of overhead storage, limitation of number of
panel widths, and non-handed components.
**************************************************************************
Manufacturers who are unable to provide workstations that conform exactly
to the furniture layouts and typical workstation types shown in the
contract drawings, may submit alternate designs for consideration by the
Contracting Officer. Alternate designs must meet or exceed the following
criteria. Alternate designs that are submitted but do not meet these
criteria will be rejected.
1.6.1
Workstation Size and Configuration
The alternate design shall provide workstations and components of the same
basic size and configuration shown, with only the sizes of the individual
components within the workstation changed to meet the standard product of
the manufacturer.
SECTION 12705
Page 9
Previous Page
