SD-02 Shop Drawings
Detail Drawings[; G][; G, [_____]]
Installation[; G][; G, [_____]]
Drawings showing the proposed workstation installation at a
scale of 1:100 (1/4 inch = 1 foot) 1/4 inch = 1 foot, unless
otherwise specified.
SD-03 Product Data
Installation Instructions[; G][; G, [_____]]
Manufacturer's product and construction specifications which
provide technical data for furniture system and components
specified, including task lighting and illumination performance
information.
Literature shall include adequate information to
verify that the proposed product meets the specification.
Warranty
Two copies of the warranty.
Workstations
Complete listing of part/model numbers for all components to be
furnished, including names and codes of components referenced on
updated drawings.
SD-04 Samples
Workstations[; G][; G, [_____]]
Four sets of the finish samples listed below. The Government
reserves the right to reject any finish samples that do not
satisfy the construction or color requirements. The Contractor
shall submit additional samples as required to obtain final
approval. Work shall not proceed without sample approval in
writing from the Contracting Officer.
a. Panel tackboard and flipper door fabric. Minimum 150 x 150
mm 6 x 6 inches with label designating the manufacturer, color,
fiber content, fabric weight, fire rating, and use (panel and/or
tackboard).
b. Panel, spine wall, work surface, modesty panel, and
component finish. Minimum 60 x 75 mm 2-1/2 x 3 inches with label
designating the manufacturer, material composition, thickness,
color, and finish.
c.
Task lights.
d. Panel and spine wall glazing. Glazing samples with label
designating the material and safety ratings.
SD-06 Test Reports
Selected Components[; G][; G, [_____]]
SECTION 12705
Page 6
Previous Page
