Detail Drawings[; G][; G, [_____]]
Drawings showing elevations of each type of sign, dimensions,
details and methods of mounting or anchoring, shape and thickness
of materials, and details of construction. A schedule showing the
location, each sign type, and message shall be included.
SD-03 Product Data
Installation[; G][; G, [_____]]
Manufacturer's descriptive data, catalogs cuts, installation and
cleaning instructions.
SD-04 Samples
Interior Signage[; G][; G, [_____]]
One sample of each of the following sign types showing typical
quality, workmanship and color. The samples may be installed in
the work, provided each sample is identified and location recorded.
a.
Directional sign.
b.
Standard Room sign.
c.
Changeable message strip sign.
d.
[
].
SD-10 Operation and Maintenance Data
Approved Manufacturer's Instructions[; G][; G, [_____]]
Protection and Cleaning[; G][; G, [_____]]
[Six][_____] copies of operating instructions outlining the
step-by-step procedures required for system operation shall be
provided. The instructions shall include simplified diagrams for
the system as installed. [Six][_____] copies of maintenance
instructions listing routine procedures, repairs, and guides shall
be provided. The instructions shall include the manufacturer's
name, model number, service manual, parts list, and brief
description of all equipment and their basic operating features.
Each set shall be permanently bound and shall have a hard cover.
The following identification shall be inscribed on the covers:
the words "OPERATING AND MAINTENANCE INSTRUCTIONS", name and
location of the facility, name of the Contractor, and contract
number.
1.3
GENERAL
Interior signage shall be of the design, detail, sizes, types, and message
content shown on the drawings/attachments/signage placement schedule (as
applicable), shall conform to the requirements specified, and shall be
provided at the locations indicated. Signs shall be complete with
lettering, framing as detailed, and related components for a complete
installation. Signage shall be obtained from a single manufacturer with
edges and corners of finished letterforms and graphics true and clean.
Recyclable materials shall conform to EPA requirements in accordance with
SECTION 10440
Page 8
Previous Page
