**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-10440 (September 2004)
----------------------------
Preparing Activity: USACE
Superseding
UFGS-10440 (July 2002)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated 23 June 2005
**************************************************************************
SECTION 10440
INTERIOR SIGNAGE
09/04
**************************************************************************
NOTE: This guide specification covers the
requirements for common types of signs, dimensional
letters, and metal plaques used inside buildings.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
**************************************************************************
PART 1
GENERAL
**************************************************************************
NOTE: This section covers some of the more common
interior sign types. When other sign types are to
be used, specifications will be modified
accordingly. Army buildings not excluded by TI
800-01 Design Criteria will be accessible in
accordance with 36 CFR, Part 1191, Americans with
Disabilities Act (ADA) Accessibility Guidelines for
Buildings and Facilities.
In combination with this specification, drawings and
attachments will include location, dimensions,
elevations, schedules, content, details and such
other information as required to indicate the extent
of the work. The same terminology and designations
used in the specification will be used on the
SECTION 10440
Page 3
Previous Page
