or patient toilet rooms.
**************************************************************************
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to in the text by basic
designation only.
ALUMINUM ASSOCIATION (AA)
AA DAF-45
(2003) Designation System for Aluminum
AA PK-1
(2002) Pink Sheets: Designations and
Chemical Composition Limits for Aluminum
Alloys in the Form of Castings and Ingot
AMERICAN ARCHITECTURAL MANUFACTURERS ASSOCIATION (AAMA)
AAMA 2604
(2002) Voluntary Specification,
Performance Requirements and Test
Procedures for High Performance Organic
Coatings on Aluminum Extrusions and Panels
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI Z97.1
(1984; R 1994) Safety Glazing Materials
Used in Buildings
AMERICAN WELDING SOCIETY (AWS)
AWS D1.2
(2003) Structural Welding Code - Aluminum
AWS D1.2M
(2003) Structural Welding Code - Aluminum
(Metric)
ASTM INTERNATIONAL (ASTM)
ASTM B 209
(2004) Aluminum and Aluminum-Alloy Sheet
and Plate
ASTM B 209M
(2004) Aluminum and Aluminum-Alloy Sheet
and Plate (Metric)
ASTM B 221
(2004a) Aluminum and Aluminum-Alloy
Extruded Bars, Rods, Wire, Profiles, and
Tubes
ASTM B 221M
(2004) Aluminum and Aluminum-Alloy
SECTION 10440
Page 6
Previous Page
