Section 01670 RECYCLED / RECOVERED MATERIALS.
1.4
QUALIFICATIONS
Signs, plaques, and dimensional letters shall be the standard product of a
manufacturer regularly engaged in the manufacture of such products and
shall essentially duplicate signs that have been in satisfactory use at
least 2 years prior to bid opening.
1.5
DELIVERY AND STORAGE
Materials shall be packaged to prevent damage and deterioration during
shipment, handling, storage and installation. Product shall be delivered
to the jobsite in manufacturer's original packaging and stored in a clean,
dry area in accordance with manufacturer's instructions.
1.6
EXTRA STOCK
**************************************************************************
NOTE: A sufficient number of identification signs
and letters for future use for changes and message
replacement shall be specified.
**************************************************************************
The Contractor shall provide [_____] extra frames and extra stock of the
following: [[_____] blank plates of each color and size for sign types
[_____].] [[_____] pressure-sensitive letters in each color and size for
sign type [_____].] [[_____] changeable message strips for sign type
[_____].]
PART 2
PRODUCTS
**************************************************************************
NOTE: Delete signage systems, directories, etc.,
not required for project. Coordinate electrical
requirements with Division 16 and available electric
service.
**************************************************************************
2.1
ROOM IDENTIFICATION/DIRECTIONAL SIGNAGE SYSTEM
**************************************************************************
NOTE: Depending on the complexity of the project
consider a modular signage system such as structural
rails and end caps. Coordinate project requirements
and specific signage system with user.
**************************************************************************
2.1.1
Standard Room Signs
Signs shall consist of [acrylic plastic 2 mm .080" thickness minimum
conforming to ANSI Z97.1][laminated thermosetting Type MP plastic
(three-ply melamine plastic laminate with phenolic core)][6063-T5 extruded
aluminum in accordance with ASTM B 221M ASTM B 221 and ASTM B 209M ASTM B
209][_____] and shall conform to the following:
[Frames shall be [aluminum][wood][molded acrylic]]. [Frames shall be [.32 mm
1/8 inch][6.35 mm 1/4 inch][
]wide.]
SECTION 10440
Page 9
Previous Page
