total weight of 746 grams per square meter 22 ounces per square yard and
1023 grams per linear meter 33 ounces per linear yard]. Width shall be [
1320/1371 mm 52/54 inches] [_____]. Vinyl wallcovering shall be tested in
accordance with NFPA 286 or have a Class A flame spread rating of 0-25 and
smoke development rating of 0-450 when tested in accordance with ASTM E 84.
[A polyvinyl fluoride (PVF) film, [0.00889 mm 0.00035 inch] [0.0127 mm
0.0005 inch] [0.0254 mm 0.0010 inch] thick shall be factory applied over
the face of the wallcovering. The film shall be transparent (clear),
medium gloss.]
2.1.2
Fabric Wallcovering [Type [A] [_____]]
Fabric wallcovering shall be a woven fabric with paper or acrylic backing
and shall be colorfast, stain, and soil resistant. Wallcovering shall be
tested in accordance with [NFPA 265, ICC IBC (Section 803.5.1 Textile Wall
Coverings) requirements, UBC 42-2, or UBC 8-2] [NFPA 286 or have a Class A
flame spread rating of 0-25 and smoke development rating of 0-450 when
tested in accordance with ASTM E 84]. Fabric wallcovering shall meet or
exceed the following:
a.
Face fiber content:
[_____]
b.
Weave:
[Plain][_____]
c.
Total weight:
[_____] g/square meter ounces per square yard
d.
Width:
[_____] mm inches
2.1.3
Acoustical Wallcovering [Type [A] [_____]]
**************************************************************************
NOTE: Add static control data if needed to meet
project requirements.
**************************************************************************
Acoustical wallcovering shall be [synthetic material] [vinyl coated fabric
with porous surface with fused back] [_____]. Wallcovering shall be tested
in accordance with [NFPA 265, ICC IBC (Section 803.5.1 Textile Wall
Coverings) requirements, UBC 42-2, or UBC 8-2] [NFPA 286 or have a Class A
flame spread rating of 0-25 and smoke development rating of 0-450 when
tested in accordance with ASTM E 84]. Acoustical wallcovering shall meet
or exceed the following:
a.
Total weight:
[_____] g/square meter ounces per square yard
b.
Width:
[_____] mm inches
c.
NRC rating in accordance with ASTM C 423; minimum NRC [_____]
2.1.4
Wallcovering Border [Type [A] [_____]]
Wallcovering border shall be nonwoven vinyl cellulose/polyester blend or
vinyl coated strippable paper back.
a.
Total weight:
[_____] g per linear meter ounces per linear yard
b.
Width:
[_____] mm inches
SECTION 09720
Page 10
Previous Page
