[ASP][STS] [and/or] [CHST] shall have no other duties other than safety and
occupational health management, inspections, and enforcement on this
contract.
][1.6.1.4
Competent Person for Confined Space Entry
**************************************************************************
NOTE: Include this paragraph in NAVY projects only
when confined space(s) are identified in the scope
of work.
**************************************************************************
Provide a competent person for confined space meeting the definition and
requirements of EM 385-1-1.
[Since this work involves marine operations that handle combustible or
hazardous materials, this person shall be a NFPA certified marine chemist.]
]1.6.1.5
Crane Operators
Crane operators shall meet the requirements in USACE EM 385-1-1, Section 16
and Appendix G. In addition, for mobile cranes with Original Equipment
Manufacturer (OEM) rated capacitates of 50,000 pounds or greater, crane
operators shall be designated as qualified by a source that qualifies crane
operators (i.e., union, a government agency, or and organization that tests
and qualifies crane operators). Proof of current qualification shall be
provided.
**************************************************************************
NOTE: Add the following paragraph for projects in
the State of Hawaii only.
**************************************************************************
[ Crane operators shall also meet the requirements of the State of Hawaii for
Crane certification.
]
1.6.2
Personnel Duties
1.6.2.1
Site Safety and Health Officer (SSHO)/Superintendent
a. Conduct daily safety and health inspections and maintain a written
log which includes area/operation inspected, date of inspection,
identified hazards, recommended corrective actions, estimated and
actual dates of corrections. Safety inspection logs shall be attached
to the Contractors' daily [production][quality control] report.
b. Conduct mishap investigations and complete required reports.
Maintain the OSHA Form 300 and Daily Production reports for prime and
sub-contractors.
c.
Maintain applicable safety reference material on the job site.
d. Attend the pre-construction conference, pre-work meetings including
preparatory inspection meeting, and periodic in-progress meetings.
e.
Implement and enforce accepted APPS and AHAs.
f. Maintain a safety and health deficiency tracking system that
monitors outstanding deficiencies until resolution. A list of
SECTION 01525
Page 13
Previous Page
