2.4
LAN
a.
The LAN shall be a dedicated network for the system. Use of the
medical facility Information Systems LAN is not acceptable.
b. LAN hardware and software shall be as determined by the system
Manufacturer and the system application design for the configuration,
capability and performance specified in this Section.
c. The LAN shall be fault tolerant and include network administration with
alarms that indicate any failures that would prevent the transmission of
code calls and radio paging data. The alarms shall be indicated on the
failed LAN hardware and transmitted to a 24/7 staffed location.
2.5
SERVERS
2.5.1
General
a. One or more servers shall be provided as required by the product and
system application design.
b. Each server shall include a server computer, keyboard, mouse, video
monitor, and UPS, and software.
(1) The computer shall be specifically designed for network server
application. Server computers hardware shall include raid level 1 storage
with 2 hard disk drives, a network interface card, and input/output drives
as required for setup programming, date archiving, and maintenance.
(2) A 15-inch LCD monitor.
(3) UPS as specified herein.
c. Server operating system and application programs for each function
served.
d. Servers shall provide the capability and performance specified in this
Section.
e.
All data communication across any interface shall be in real time.
2.5.2
Radio Page Server
a. Physical connection, protocol, and data communications as required to
interface with the Radio Paging System.
b.
Capacity for at least [____] pager addresses.
c. The Radio Page Server shall be 100 percent compatible with the input
requirements of the Radio Paging System CPU.
d. Calls shall be processed in accordance with the priority requirements
of the system, and forwarded to the Radio Paging System CPU with priority
level inputs as required by the CPU.
2.6
UPS
a. UPS shall be UL 1778 listed, and comply with the requirements of 47 CFR
15.
SECTION 16730A
Page 35
Previous Page
